Search
Close this search box.
Search
Close this search box.

Dust Test Chambers

Our Dust chambers are designed for settling dust testing applications for automotive, electronics and defense test requirements. The Weiss Technik D Series Dust Test Chamber is designed to test a component’s resistance to a dust-filled environment as defined in SAE Dust Test Specifications J-575, Section 4.5.

The product is placed on the specimen rack and dust is agitated throughout the chamber by injecting compressed air into each of the dust troughs. The dust then settles, covering the product under test. A compressed air pressure regulation system with filter and trap is provided for connection to your air supply. Air must be supplied at a minimum pressure of 80 psi and 10 CFM. The D Series’ control timers allow pre-setting the agitation, the number of agitation intervals, and the number of cycles with automatic shutdown at the end of the preset number of cycles.

Weiss Technik takes the back pain out of loading test specimens in dust chambers with our removable EZ Load Front Panel, an option available on Weiss Techniks’ Dust Test Chambers, that allows the test product to be placed on the specimen rack without having to lift it over the chamber wall and lower it on the rack. It’s easy to load and easy on your back. The removable panel is held firmly in place by compression latches. The latch pressure and the front panel gasket create a positive seal that keeps the dust out of your lab and inside your chamber, where it belongs. The front Panel has been removed, allowing easy access to the specimen rack.

The Dust Chamber D Series is the perfect choice for all your Dust Testing  requirements.

Specifications

The D Series chamber

Product Features

The Dust Test Chamber, D Series, is constructed of 16 gauge sheet metal with an air-dried lacquer-sprayed finish. The hinged lid provides full access to the workspace and is available with the option of viewing windows. In the larger D60 model, (2) 8″ to 10″ fan blades are mounted in the chamber to keep the dust in an agitated state. The pressure relief vent which is provided will prevent pressure buildup within the cabinet while preventing the escape of dust material.

  • Total access chamber lid stays open at 60˚ angle
  • Chamber lid gasketed with closed cell foam material
  • Lid equipped with quick-release latch hardware
  • Pressure relief vent with collector filter
  • Removable stainless steel wire grate specimen platform
  • Removable spray nozzles
  • Compressed air pressure regulation system with filter and trap
  • (2) adjustable interval digital timers and (1) counter timer
  • Compressed air dual tower air drier system dries air to a -85˚F dewpoint level
  • 115-1-60 V power in with an amp draw of 5 amps
  • Interior light with exterior switch

Additional Options

The new removable EZ Load Front Panel, an option available on Weiss Techniks’ Dust Chambers, allows the test product to be placed on the specimen rack without having to lift it over the chamber wall and lower it on the rack. It’s easy to load and easy on your back.

  • Custom sizes available consult with your local salesperson
  • Many options available – contact your local salesperson for complete list

Brochures

D Series Jan 2017

Product Inquiry

Consulta De Productos

  • This field is for validation purposes and should be left unchanged.
  • This field is for validation purposes and should be left unchanged.