WT-D & WK-D Vacuum Temperature & Climate Test Chambers

Specifications

Temperature Range:
-70 °C to +180 °C

Vacuum:
≥ 400 mbar

Vacuum system for continuous dilution of the test space atmosphere until it reaches the required vacuum
The outer casing is made of corrosion-resistant, galvanized sheet steel with an environmentally friendly coating
Test chamber door is hinged on the left for the whole cross section of test space
Test chamber door has optimum pressure when closed
Maintenance-friendly position
The entire power electronics is located in a switch cabinet at the right side wall of the test chamber
Safety mechanism which switches off the relevant function circuit and/or the entire test chamber
The test space is made of high-quality stainless steel and is vacuum- and vapor-tight welded
Separate sensors to protect the specimens irrespective of the temperature control system
Additional ducts in the side panels are provided for the electrical connections of the specimens from the outside

Low/high temperature safety cutout as per EN 60519-2 (1993) with separate sensor, thermal safety class 2
Touch panel
Ethernet interface
4 potential-free switching inputs and outputs
Contactless switching of heating panel
50 mm entry port in the right side panel
Water-cooled condensers

Additional features for WK/D series

Humidity sensor and an integrated threshold value monitoring system for humidity
Low water indicator
Special temperature conditioning system in the climate working range for the best temperature and humidity constancy
Capacitive humidity measurement