TS-60 Thermal Shock Test Chamber

Product Features

Environmental conditions have a considerable effect on the function and the reliability of electronic components, devices and systems. The main purpose of temperature shock tests is to determine, if sudden temperature changes have an influence on the specimen’s long term function. In addition, early failures due to part and workmanship defects can be provoked without reaching the mechanical and thermal stress limits of the construction. 

• Test space 2.1 cu. ft/60 liters
• Vertical order of the chamber for safe and quick test performance
• Regular temperature distribution in test space via a high recirculating rate with optimum air flow
• Hot chamber temperatures of +50 °C to +220 °C
• Cold chamber temperatures of –80 °C to +70 °C
• Alternating time between the chambers <10 sec.
• More than 1,000 cycles are possible without defrosting via a standard integrated volume compensation system for continuously operation
• Low sound-pressure level, only 58 dB(A)
• Operator friendly design enhances maintenance of the machine components
• Entry port Ø 80 mm
• Loading capacity of the lift 20 kg
• 8″ TFT-color touch screen display
• Control panel
• Ready to plug-in
• Window in hot zone
• Ultra-lightweight shelf includes rails
• Lift in loading position locked
• Entry port Ø 80 mm
• Volume compensation system for long-term operation
• Air-cooled refrigeration unit
• Hermetically sealed CFC-free refrigeration circuits
• 8″ TFT-color touch screen display
• CONTROLPAD* for indication of actual values
• 32 bit control and monitoring system S!MPAC*
• Software S!MCONTROL* for comfortable operation
• Interfaces RS 232/USB/Ethernet
• Digital I/O, potential-free, 24 V, 4 freely available inputs/outputs
• Independent adjustable temperature limiter (t_min/t_max ) for hot and cold zone
• Potential-free contact for switching-off of test specimens
• Adjustable software temperature limiter min/max
• Hours of operation counter.
• Temperature control via sensor in cradle or in hot or cold zone
• Defrosting cycles: automatic and programmable
• Delayed start option
• Standards are pre-programmed and recallable
• Mobile version
• Calibration of two temperature values
• Powder-coated housing made of galvanized steel sheet
• Test space, lift and insert shelves (insert baskets) made of corrosion resistant stainless steel